Hand made, cast in magnesium this is an exact replica of the Honda CR750 factory rear hub. Complete with backing blate, brake shoes and large sprocket circlip.

$3500.00

CR750 Replica rearset foot peg brackets

Constructed from original factory blueprints, here is a set of footpeg & exhaust brackets to fit Honda CB/CR750 frames. To use in conjuction with CBR alloy foot peg/brake lever.

$350.00

Replica CR750 front fender

Hand laid glass fiber fender blade with alloy brackets to replicate the 1960's Honda GP style racers.
To fit any fork legs with two mounting holes per side.
Note: Will not fit early style CB750 forks.

$350.00

CR Special Kehin carbs

To fit Honda CB750 CB500/550/650 CB400 fours.
(Other model/brands also available)

$749.00

CR Special Keihin airfilters

For those who need protection from dirt/sand on the track or street, these are the ticket....
Air fliters from K & N with chrome end caps.

$189.00

Heavy Duty Primary Drive rubbers.

Designed and tested at M3 Racing HQ, these are heavy duty primary drive
dampeners to fit Honda CB750. Complete with new rivets to make rebuild easy.
A must for any engine with over 90 HP.

$149.00

CB750 F2 Intake & Exhaust Valves (special order)

$68.50 each

New to M3, here is a 836cc big bore kit that works great with OEM cylinders
for street or racing use.

Complete with special head gasket.

$749.00

62mm piston kit (complete with valve pockets)

A "bolt in kit" for the club man racer

$695.00

62mm piston kit (complete with unfinished domes)

A kit for the serious engine builder who wants to have control over valve pocket sizes and depths.

$795.00

Camshaft (Mega-Cycle or Web-Cam M3 special grind)

$296.00

Lightened rocker arms

A must for any high RPM engine

$125.00
(set of 8)

Valve springs with Ti retainers

The best quality steel springs from Kibblewhite Prec. Machine.

$230.00

5MM Valve stem kit

Complete with Ti retainers, springs, valves, lash caps, & seals

$895.00

Cam chain control tensioner

The end of your cam chain failures!

$150.00

Cam chain

Heavy duty, full side plate racing cam chain.

$65.00

Top cover-cam chain control system.

Send us you cover and we will weld/install those trick cam holder/supports that the factory used.

$350.00

Heavy duty cylinder studs

Used with our special head gasket...no more oil leaks!

$99.00

Heavy duty clutch springs

A must for controlling the serious power our engines develop!

$20.00

Racing stainless steel valves

The best available from Kibblewhite Precision Machine

$280.00
(set of 8)

Crankshaft lighten and polish

Must have good customer core.

$325.00

Connecting rods (Carrillo)

Must have for the demands of a serious road racing engine.

$1350.00

Head work (porting, valve work, & assay)

The best from Berreth Heads.

$850.00

CR Racing carbs & parts

I sometimes run into these ultra rare fuel mixers.

Call

Close ratio gear box (Nova)

A special order part from over the pond.

$2995.00

Swing arm bushings

CB500/550/750 These bushing will eliminate the "death wobble!"

Tapered steering head bearings

Ensures proper chassis alignment and reduces head shake.

Dyna S ignition (bolt on)

Set and forget..you will never have to "time" the engine again!

$209.00

Dyna III ignition (bolt on)

Same as the Dyna S ignition but with a hotter spark and more punch.

Complete charging system with alloy CR replica cover.

Dyna coils

A perfect match for the Dyna ignition.

$160.00
(set of 2)

COMPLETE ENGINE ASSAYS

If you want to run up front, but don't have the time to build.....contact us about one of our 90+ HP engine assemblies.

From $9999.99

Pistons, rings, pins, keepers.1

11.6 compression...just enough for this air cooled engine. (500T & 450)

$575.00

Racing head gasket

No more oil leaks with this composite piece

$50.00

Camshaft (pair)

M3 Mega-Cycle grind...from years of research on the track.

$495.00

Hard faced rocker arms (must have customer cores)

A must for this high engine.

$75.00
each

Clutch springs

Control that HP!

$20.00

Cam chain

A special full side plate racing chain.

$60.00

Valve Spring Conversion Kit CB450/500

Complete with everything needed to remove OEM torsion bar valve train. Includes valves, guides, seals, springs, titanium valve retainers and instructions.

$475.00

Ti Valves ( Standard & oversize)

Call

Valve guides... Kibblewhite's finest materials.

$12.00

Crankshaft lighten/balance/polish

Call

Head work (porting, valve job, spring stacking, and assay.)

Berreth Heads best!

$650.00

Dual plug head (send us yours and we'll make work right)

$195.00

Racing ignition (no coils)

From Dyna & Barker Engineering

$225.00

Racing coils (set)

A must use with above ignition.

$115.00

Nova close ratio gear box

Call

Complete engines assays

If you don't have the time to build your own.

From $3500.00

Pistons, rings, pins, keepers.

11.4 to 1 compression...just enough for this air cooled engine.

$495.00

Racing head gasket (includes base gasket)

No more oil leaks with this composite piece

$50.00

Camshaft

M3 Mega-Cycle grind...from years of research on the track.

$365.00 - $395.00
(email or call for pricing)

Hard faced rocker arms (must have customer cores)

A must for this high RPM engine.

$70.00
each

Valve springs .......Kibblewhite Precision Machine's best.

$85.00

Ti retainers/special springs.

As raced by Jim Swartout to AHRMA championships in 2000-2001, this is "the" valve spring kit designed from the ground up to control the valves at all RPMs.

$195.00

Clutch springs

Control that HP!

$20.00

Cam chain

A special full side plate racing chain.

$65.00

Cam chain control system

No more broken chains or worn out rollers...coming Jan 2000

$150.00

Cylinder studs (heavy duty with machine work on cases)

This is THE fix for this engine that likes to leak.

$350.00

Stainless steel valves from Kibblewhite Precision Machining

28mm Exhaust & 35mm Intake

$56.19
each

Valve guides

Kibblewhites finest materials.

$12.00

Crankshaft lighten/balance/polish

Call

Head work (porting, valve job, spring stacking, and assy.)

Berreth Heads best!

$650.00

Racing ignition (no coils)

From Dyna & Barker Engineering

$225.00

Racing coils

A must use with above ignition.

$115.00 set

Complete engines assys

If you don't have the time to build your own.

From $2500.00

BIG BORE PISTON KIT 250 (75, 76, & 77mm bores)

Make that "thumper" thump!

$165.00

BIG BORE PISTON KIT 350 (80, 81, & 82mm bores)

Ditto above.

$165.00

SLEEVES FOR CYLINDER BORES OF 74mm or 79mm

As they say...bigger is better.

$75.00

HARDENED CAM on customer core.

We love these hard weld cams vs billets.

$125.00

HARDENED CAM on Mega-Cycle core.

$175.00

NEW NEEDLE BEARING CAM

Save that old head with this conversion.

$275.00

MACHINE HEAD FOR NEEDLE BEARING CAM

$125.00

VALVE GUIDES

Made of Ampco-45

$12.00

SLOTTED CAM SPROCKETS

A must for proper cam timing.

$55.00

REWELD ROCKER ARMS

Save those old worn/burnt rockers!

$60.00

VALVE SPRING KIT WITH Ti RETAINERS

The best there is.

$145.00

VALVE SPRING KIT WITH ALLOY RETAINERS

A nice kit for those on a budget.

$75.00

HEAVY DUTY CLUTCH SPRINGS

Keep that power hooked up!

$20.00

FLOWED/PORTED HEAD.

Power by Berreth Heads!

$325.00

CARB KITS, STROKERS, & MORE

Just call for info.